Question 1

How do I clean the accessories for the apex locator?

Ulrika Holm · Accepted Answer

The motor handpiece and measuring wire shall be wiped with a soft cloth and disinfection solution.

The file clip and the lip clip can be autoclaved.

Question 2

Does the motor have an apex locator?

Ulrika Holm · Accepted Answer

Yes, there is a built-in apex locator that can be used during preparation or as stand alone.

Question 3

Do I have to re-install the settings every time using the motor?

Ulrika Holm · Accepted Answer

No, when coming back to the motor after a break, you will find that the last used program is the program that shows up first.

Question 4

Which angles shall be used for the S1 System?

Ulrika Holm · Accepted Answer

The forward angle (clockwise) shall be set for 180°. The counter- clockwise angle at 30°.

Question 5

Which file systems can be used with the Sendoline Endo Motor?

Ulrika Holm · Accepted Answer

There are programs to be used with the Sendoline S5 system - in continuous rotation movement.

For the S1 System there are program prepared- you need to set the angles yourself.

In addition, there are open programs for both reciprocating movement as well as continuous rotation movement- meaning that the motor is open to be used with most systems.

You need to do the settings yourself.

Question 6

How long is the warranty for the Sendoline Endo Motor?

Ulrika Holm · Accepted Answer

The warranty is 12 months (except for apex locator accessories).

Question 7

What kind of adapter do I need for my cleaning/lubrication machine?

Ulrika Holm · Accepted Answer

You will most probably need two different adapters- ask your service technician for help.

Question 8

How do I lubricate the contra-angle?

Ulrika Holm · Accepted Answer

There are different ways to lubricate the contra angle. The easiest way is to use the little adapter that comes with the contra angle- with that you can use a spray bottle with oil for the lubrication.

You can also use a lubrication machine like DAC, iCare or similar. For that you will need adapters - ask your local service technician for help.

Question 9

How do I clean the Sendoline Endo Motor?

Ulrika Holm · Accepted Answer

The contra angle shall be internally and externally cleaned- and most important the contra angle shall also be lubricated regularly.

The contra angle head can of course be autoclaved – use the same program as you are using for your other contra angles.

Make sure that you read the instructions for use for detailed information regarding maintenance.

Other parts, the motor handpiece and charging station shall be wiped with a soft cloth and disinfection solution.

Question 10

For how long time can I use the battery after it is fully charged?

Ulrika Holm · Accepted Answer

With a fully charged battery you can work approximately 2,5 hours.

Question 11

How do I charge the Sendoline Endo Motor

Ulrika Holm · Accepted Answer

You charge the Sendoline Endo Motor in the cordless charging station when needed. The charging station comes with the Sendoline Endo Motor.

Question 12

What type of battery is there in the Sendoline Endo Motor

Ulrika Holm · Accepted Answer

It is a 2000mAH lithium battery

Question 13

Is it possible to use the Woodpecker motor with Sendoline instruments/files?

Ulrika Holm · Accepted Answer

Yes, you can use the standard Woodpecker motor, and other motors if the motor have the open programs that you can set yourself. You will need to program the recommended settings for the systems. You will only find the Sendoline programs for Sendoline files in the Sendoline Endo Motor.

Question 14

I have seen a motor that looks very similar to the Woodpecker motor, is it the same motor?

Ulrika Holm · Accepted Answer

Sendoline Endo Motor is manufactured by Woodpecker for Sendoline- that information is also clearly noted on the product package box and in the IFU.

Sendoline Endo Motor have specific programs to be used with the Sendoline file system, you don’t find that in other motors.