Sendoline S3 System
All instruments are packed in pre-sterilized blisters, ready to use.
There is one assortment pack- one file of each size, file #1 in 19 mm length, all the other in length 25 mm.
There are also refills of each size, packed in a blister of 6 files. Refills come in either 25 mm or 31 mm length for size #2, #3, and the S3 Glidepath file. The #1 file is 19 mm.
Yes, all Sendoline S3 instruments are delivered pre-sterilized in blister package, ready to use.
Yes, the instruments in the system are heat-treated, except for the S3 file no. 1 that has a traditional NiTi alloy.
- S3 file number 1 is size 30/08
- S3 file number 2 is size 30/06
- S3 file number 3 is size 30/04
- S3 Glidepath is size 20/04
All instruments come in 25 mm and 31 mm length – except for the S3 no. 1, the coronal flaring file that is 19 mm.
Already when developing the reciprocating system, S1, Sendoline used a reciprocating movement with a bigger angle in the clockwise direction, the files have a positive cutting angle. The positive cutting angle is the reason that we can use the same instruments with both a continuous rotation and reciprocating movement.
When using the Sendoline Endo Motor, select program S1/S3 and control that you have the correct angles in the program – use 180° clockwise and 30° counter-clockwise.
If using another motor, where you can do your own settings for reciprocating movement you use the angles above. In addition you need to adjust speed to 380 RPM and torque to 3,0 Ncm.
You can also use the Sendoline S1 contra angle that you connect to your dental unit. In that case you don´t need to do any settings, just make sure that you are using full speed on your foot pedal.
If you are using the Sendoline Endo Motor, you find that the setting is already installed – select the program named S3 System.
If you are using the previous Sendoline motor, the S5 endo motor you shall select setting no. 3.
If you are using another motor, where you can do your own settings the recommended speed for S3 is 300 RPM and 2,0 Ncm in torque. You can use the same setting for all files in the S3 System, including the S3 Glidepath file.
The Sendoline S3 System can be used with either a continuous rotation or a reciprocating movement – you can choose to work with the movement you prefer.
The system includes 3 files in the basic sequence – the instruments are named 1, 2 and 3.
Additional is the glidepath file, S3 Glidepath file that we recommend being used with the S3 System. The S3 Glidepath file can also be used together with other file systems where you feel that you have use of a better glide path preparation.
